Titan Sky

Titan Sky 2017-08-02T12:14:47+00:00

Screen Shot 2016-04-18 at 1.46.08 PM

Titan Sky


Titan’s internal cross-brace structure makes these sheets twice as strong and stiff as the equivalent standard Polycarbonate sheets,without extra weight.

Product Features


  • Five Walls
  • Increased Thermal Insulation
  • X-Pattern Design
  • More Rigidity
  • Higher Light Diffusion
  • Longer Lengths

Properties


Titan sheets provide extra strength under heavy loads and difficult climatic conditions, without extra cost. Reinforced sheet performance without additional weight, compared to 16mm Standard Sheets Recommended Uses: Stadiums, sports facilities, greenhouses and where heavy load support is required. Especially effective under snow loads, hail, tornadoes and other extreme weather conditions. Available in super-strength configurations for especially extreme weather conditions (by special order) Available with Primalite and Silhouette special coatings

Product Structure Thickness
(mm)
Weight
(.lbs/ft2)
Width
(inch)
Minimum
Radius for Cold
Bending
Arches (inch)
U-Factor*
(BTU/h/ft2 /F)
LT (%) / SHGC (X.XX)
Clear NGL Ice Bronze
Titan sky tsk16
16 0.51 47.25 110 0.389 25%

0.52

32%

0.42

42%

0.46

42%

0.27

LT – Light Transmission in % according to ASTM D-1003, measured between ribs.

SHGC – Solar Heat Gain Coefficient* is the ratio of solar heat gain through the sheet and the incident solar radiation. It takes into account all conduction, convection and radiation effects involved.

* The lower this number, the more solar heat is being blocked.

Download PDF

Plazit Polygal PDFs Contain Active Links